This guide is designed to walk you through the main features of your RoboVac’s remote control, such as how to adjust suction power, choose cleaning mode, and change RoboVac’s cleaning direction. Please note this article is only suitable for Bounce series RoboVac models.

Note: RoboVac’s remote control is similar to a TV remote control, please make sure you are within close proximity to your RoboVac when using the remote control.

eufy RoboVac Bounce series remote control

There are two types of remote controls for the Bounce series models, please refer to the images below.

Non-WiFi models:

WiFi models:

How do I adjust RoboVac’s suction power?

To adjust your RoboVac’s suction power, please first start your RoboVac. Once the RoboVac is cleaning, point your remote at the RoboVac and press and hold the button to adjust RoboVac’s suction power.

There are three different suction power modes.

• Standard: RoboVac will emit a single beeping sound when the suction power mode is adjusted to this mode, and the Standard mode is suitable for hardwood floors.
• BoostIQ: RoboVac will emit two beeping sounds when the suction power mode is adjusted to this mode, and the BoostIQ mode is suitable if you have a mixture of hardwood floors and carpets. RoboVac will automatically increase its suction power when it navigates from hardwood floor to carpets.
• Max: RoboVac will emit three beeping sounds when the suction power mode is adjusted to this mode, and the Max mode is suitable if you have mainly carpets.

How do I change RoboVac’s cleaning mode?

To change your RoboVac’s cleaning mode, please first start your RoboVac. Once the RoboVac is cleaning, point your remote at the RoboVac and press the following buttons to adjust RoboVac’s cleaning mode.

• Auto cleaning: RoboVac will run for a complete cleaning cycle until its battery is low and needs to be recharged.
• Spot cleaning: RoboVac will spin in a circular motion to repeatedly clean the same spot.
• Edge cleaning: RoboVac will clean along edges of walls. 
• Quick cleaning: RoboVac will run for 30 minutes before it goes back to the charging base.

How do I change RoboVac’s cleaning direction?

To change your RoboVac’s cleaning direction, please first start your RoboVac. Once the RoboVac is cleaning, point your remote at the RoboVac and press any of the four directional arrows to change its cleaning direction. Please note the Down arrow will not be functional since RoboVac is designed to continuously move forward in its cleaning process. Additionally, when either the Left or the Right arrow is pressed, RoboVac will remain stationary and spin in either the Left or the Right direction until the desired direction is reached. Simply release the directional arrow for your RoboVac to continue moving forward.

If you have further questions regarding how to use eufy RoboVac’s remote control, please contact us for assistance.