The X8 Pro SES, L35 Hybrid+、LR30 Hybrid+、G35+、G40+, and G40 Hybrid+ models are equipped with a Self-Empty Station to support the robot's Self-emptying function.

For X8 Pro, it can also work with the X8 Pro SES model's Self-Empty Station.You only need to purchase a Self-Empty Station and its power adapter. Please refer to the following article for more information:

Can the Self-Empty Station for the X8 Pro SES work with my X8 Pro?

For the L35 Hybrid and LR30 Hybrid, can also work with the L35 Hybrid+ and LR30 Hybrid+ models' Self-Empty Station; however, you will need to use the same dustbin for L35 Hybrid+ and LR30 Hybrid+. As these two models do not include a Self-Empty Station, please make sure to use the correct dustbin and water tank for them to work with the Self-Empty Station. You can order it here. Please refer to the following article for instructions on how to use the Self-Empty Station:

https://support.eufy.com/s/article/Will-the-RoboVac-automatically-stop-or-alert-once-the-dust-collector-is-full

Although the Self-emptying function does not require users to manually empty the dustbin from the robot, please note that it is important to empty the dust bag or replace the dust bag with a new one if needed. Please refer to the following steps on how to clean and replace the dust bag:

X8 Pro SES:

From 04:48 in the video: eufy Clean X8 Pro Series: Clean and Maintain the Accessories

L35 Hybrid+/LR30 Hybrid+: https://support.eufylife.com/s/article/RoboVac-L35-LR30-Series-Accessories-Cleaning-and-Maintenance

G35+/G40+/G40 Hybrid+: https://support.eufylife.com/s/article/eufy-Clean-G-Series-Cleaning-and-Maintenance-of-self-empty-Station

1. Lift open the top cover.
2. Pull up the dust bag handle to remove the dust bag. After removing the dust bag, please close the dust bag handle to prevent dust from spilling.
3. Clean/Discard the used dust bag.
4. Install a clean/new dust bag.
5. Press down to close the top cover.

Before starting a new cleaning cycle with your robot, please make sure the filter inside the Self-Empty Station is clean in order to achieve optimal self-emptying results.

For the X8 Pro SES model:

For the L35 Hybrid+/LR30 Hybrid+ model:

If you need any further assistance, please contact us.